08_fix_etl_vehicle_key.sql

@@ -0,0 +1,104 @@
+-- 08_fix_etl_vehicle_key.sql
+-- Fixes BUG-01: dwh_gold.refresh_daily_metrics() inserted t.imei (TEXT) into
+-- fact_daily_fleet_metrics.vehicle_key (INTEGER REFERENCES dim_vehicles), so
+-- every nightly call raised "invalid input syntax for type integer".
+--
+-- The fix has two parts:
+--   1. Seed dwh_gold.dim_vehicles from tracksolid.devices so every IMEI has
+--      a serial vehicle_key to point at.
+--   2. Rewrite refresh_daily_metrics() to JOIN through dim_vehicles and
+--      SELECT the serial key instead of the raw IMEI. The function also
+--      upserts dim_vehicles at the top of each run so newly-registered
+--      devices appear in the warehouse without manual intervention.
+
+BEGIN;
+
+-- ── 1. Backfill dim_vehicles ─────────────────────────────────────────────────
+-- One row per device. is_active mirrors enabled_flag; vehicle_number tracks
+-- the plate so dashboards can label charts without joining back to devices.
+INSERT INTO dwh_gold.dim_vehicles (imei, vehicle_number, is_active)
+SELECT
+  d.imei,
+  d.vehicle_number,
+  COALESCE(d.enabled_flag, 1) = 1
+FROM tracksolid.devices d
+ON CONFLICT (imei) DO UPDATE SET
+  vehicle_number = EXCLUDED.vehicle_number,
+  is_active      = EXCLUDED.is_active;
+
+-- ── 2. Rewrite ETL function ──────────────────────────────────────────────────
+CREATE OR REPLACE FUNCTION dwh_gold.refresh_daily_metrics(target_date DATE)
+RETURNS void LANGUAGE plpgsql AS $$
+BEGIN
+  -- Sync dim_vehicles first so any IMEI seen in trips has a vehicle_key.
+  -- Without this, a brand-new device would have trip rows but no
+  -- dim_vehicles entry, and the JOIN below would drop its metrics.
+  INSERT INTO dwh_gold.dim_vehicles (imei, vehicle_number, is_active)
+  SELECT
+    d.imei,
+    d.vehicle_number,
+    COALESCE(d.enabled_flag, 1) = 1
+  FROM tracksolid.devices d
+  ON CONFLICT (imei) DO UPDATE SET
+    vehicle_number = EXCLUDED.vehicle_number,
+    is_active      = EXCLUDED.is_active;
+
+  INSERT INTO dwh_gold.fact_daily_fleet_metrics (
+    day,
+    vehicle_key,
+    total_distance_km,
+    total_trips,
+    total_drive_hours,
+    total_idle_hours,
+    fuel_consumed_l,
+    alarm_count,
+    overspeed_count,
+    day_start_time,
+    day_end_time,
+    avg_speed_kmh,
+    peak_speed_kmh
+  )
+  SELECT
+    target_date                                                           AS day,
+    dv.vehicle_key                                                        AS vehicle_key,
+    ROUND(SUM(t.distance_km)::numeric, 3)                                 AS total_distance_km,
+    COUNT(*)                                                              AS total_trips,
+    ROUND((SUM(t.driving_time_s) / 3600.0)::numeric, 2)                   AS total_drive_hours,
+    ROUND((SUM(t.idle_time_s)    / 3600.0)::numeric, 2)                   AS total_idle_hours,
+    ROUND(SUM(t.fuel_consumed_l)::numeric, 3)                             AS fuel_consumed_l,
+    COUNT(a.id)                                                           AS alarm_count,
+    COUNT(a.id) FILTER (WHERE a.alarm_type ILIKE '%speed%')               AS overspeed_count,
+    MIN(t.start_time AT TIME ZONE 'Africa/Nairobi')::TIME                 AS day_start_time,
+    MAX(t.end_time   AT TIME ZONE 'Africa/Nairobi')::TIME                 AS day_end_time,
+    ROUND(AVG(t.avg_speed_kmh)::numeric, 2)                               AS avg_speed_kmh,
+    MAX(t.max_speed_kmh)                                                  AS peak_speed_kmh
+  FROM tracksolid.trips t
+  JOIN dwh_gold.dim_vehicles dv
+    ON dv.imei = t.imei
+  LEFT JOIN tracksolid.alarms a
+    ON  a.imei = t.imei
+    AND DATE(a.alarm_time AT TIME ZONE 'Africa/Nairobi') = target_date
+  WHERE DATE(t.start_time AT TIME ZONE 'Africa/Nairobi') = target_date
+    AND t.end_time IS NOT NULL
+  GROUP BY dv.vehicle_key
+  ON CONFLICT (day, vehicle_key) DO UPDATE SET
+    total_distance_km = EXCLUDED.total_distance_km,
+    total_trips       = EXCLUDED.total_trips,
+    total_drive_hours = EXCLUDED.total_drive_hours,
+    total_idle_hours  = EXCLUDED.total_idle_hours,
+    fuel_consumed_l   = EXCLUDED.fuel_consumed_l,
+    alarm_count       = EXCLUDED.alarm_count,
+    overspeed_count   = EXCLUDED.overspeed_count,
+    day_start_time    = EXCLUDED.day_start_time,
+    day_end_time      = EXCLUDED.day_end_time,
+    avg_speed_kmh     = EXCLUDED.avg_speed_kmh,
+    peak_speed_kmh    = EXCLUDED.peak_speed_kmh;
+END;
+$$;
+
+COMMENT ON FUNCTION dwh_gold.refresh_daily_metrics(DATE)
+  IS 'Populates or refreshes fact_daily_fleet_metrics for the given date. '
+     'Joins tracksolid.trips through dwh_gold.dim_vehicles to map IMEI → vehicle_key. '
+     'Call nightly: SELECT dwh_gold.refresh_daily_metrics(CURRENT_DATE - 1);';
+
+COMMIT;

db_audit/checks/bug03_webhook_distance_units.sql

@@ -0,0 +1,85 @@
+-- BUG-03 diagnostic: is the webhook `miles` field actually miles, or km?
+--
+-- Context: ingest_movement_rev.poll_trips divides the API `distance` field by
+-- 1000 (FIX-M16: API returns metres despite docs saying km). The webhook
+-- handler in webhook_receiver_rev.push_trip_report stores `item.get("miles")`
+-- directly into distance_km with no unit conversion. The field name is
+-- suspicious. If Jimi actually pushes miles, every push-sourced trip distance
+-- is inflated by ≈ 1.609×.
+--
+-- We cannot diff push vs poll on the SAME (imei, start_time) row because both
+-- paths ON CONFLICT DO UPDATE distance_km — the later writer overwrites the
+-- earlier one. So instead, this script compares the *distribution* of the
+-- distance_km / great_circle_km ratio for push-source vs poll-source trips
+-- across the last 30 days.
+--
+-- A driven trip on real roads should have road_km > great_circle_km
+-- (ratio > 1). If push and poll come from the same fleet on the same roads,
+-- their median ratios should be roughly equal. If push's median ratio is
+-- ≈ 1.609× higher than poll's, the `miles` field is miles and the webhook
+-- needs to divide by 1.609 (or by 1000 if Jimi is actually sending metres
+-- like the polling endpoint does — the ratio test catches both).
+--
+-- Run:
+--   docker exec -i $DB psql -U postgres -d tracksolid_db \
+--     < db_audit/checks/bug03_webhook_distance_units.sql
+
+-- ── 1. Per-trip ratio of stored distance to start→end great-circle distance.
+WITH trip_ratios AS (
+  SELECT
+    t.source,
+    t.imei,
+    t.start_time,
+    t.distance_km,
+    ST_Distance(t.start_geom::geography, t.end_geom::geography) / 1000.0
+      AS great_circle_km,
+    CASE
+      WHEN ST_Distance(t.start_geom::geography, t.end_geom::geography) > 0
+      THEN t.distance_km
+           / (ST_Distance(t.start_geom::geography, t.end_geom::geography) / 1000.0)
+      ELSE NULL
+    END AS ratio
+  FROM tracksolid.trips t
+  WHERE t.start_time > NOW() - INTERVAL '30 days'
+    AND t.start_geom IS NOT NULL
+    AND t.end_geom   IS NOT NULL
+    AND t.distance_km IS NOT NULL
+    AND t.distance_km > 0.1                       -- filter out idle creep
+    AND ST_Distance(t.start_geom::geography,
+                    t.end_geom::geography) > 200  -- ignore round-trips / parking
+)
+SELECT
+  source,
+  COUNT(*)                                                      AS trips,
+  ROUND(AVG(ratio)::numeric, 3)                                 AS avg_ratio,
+  ROUND((percentile_cont(0.5) WITHIN GROUP (ORDER BY ratio))::numeric, 3)
+                                                                AS median_ratio,
+  ROUND(MIN(ratio)::numeric, 3)                                 AS min_ratio,
+  ROUND(MAX(ratio)::numeric, 3)                                 AS max_ratio
+FROM trip_ratios
+GROUP BY source
+ORDER BY source;
+
+-- ── 2. Side-by-side sample of recent push vs poll trips for spot-checking.
+--      If push distance_km is consistently ≈ 1.609× the great_circle for
+--      short, near-straight trips while poll trips show smaller ratios,
+--      the unit conversion is needed.
+SELECT
+  source,
+  imei,
+  start_time,
+  ROUND(distance_km::numeric, 2)                                AS stored_km,
+  ROUND((
+    ST_Distance(start_geom::geography, end_geom::geography) / 1000.0
+  )::numeric, 2)                                                AS straight_line_km,
+  ROUND((
+    distance_km
+    / NULLIF(ST_Distance(start_geom::geography, end_geom::geography) / 1000.0, 0)
+  )::numeric, 2)                                                AS ratio
+FROM tracksolid.trips
+WHERE start_time > NOW() - INTERVAL '7 days'
+  AND start_geom IS NOT NULL
+  AND end_geom   IS NOT NULL
+  AND distance_km > 0.5
+ORDER BY start_time DESC
+LIMIT 40;

run_migrations.py

@@ -31,6 +31,7 @@ MIGRATIONS = [
     "05_enhancement_migration.sql",        # new tables, OBD columns, dwh_gold expansion
     "06_business_analytics_migration.sql", # ops schema, dispatch_log, assigned_city
     "07_analytics_views.sql",              # Grafana-facing views in tracksolid.*
+    "08_fix_etl_vehicle_key.sql",          # BUG-01: ETL TEXT→INTEGER mismatch on vehicle_key
 ]
 
 # ── Tables that must exist before the service is allowed to start ─────────────

sync_driver_audit.py

@@ -15,7 +15,7 @@ import time
 from concurrent.futures import ThreadPoolExecutor
 
 from ts_shared_rev import (
-    TARGET_ACCOUNT,
+    TARGETS,
     api_post,
     get_conn,
     get_token,
@@ -37,14 +37,31 @@ def run_audit():
         log.error("Could not obtain API token. Check credentials.")
         return
 
-    # 1. Fetch all devices from API
-    resp = api_post("jimi.user.device.list", {"target": TARGET_ACCOUNT}, token)
-    if resp.get("code") != 0:
-        log.error("API error: %s", resp)
-        return
+    # 1. Fetch all devices from API across every configured sub-account.
+    # [FIX-M19] The fleet spans multiple Tracksolid sub-accounts (e.g.
+    # fireside, Fireside@HQ, Fireside_MSA). Iterate TARGETS and dedupe by
+    # IMEI, keeping the most recently-seen record. Without this, devices
+    # registered under a non-primary sub-account never appear in the audit
+    # and never get upserted.
+    devices_by_imei: dict[str, dict] = {}
+    for target in TARGETS:
+        resp = api_post("jimi.user.device.list", {"target": target}, token)
+        if resp.get("code") != 0:
+            log.warning("device.list failed for target=%s: code=%s msg=%s",
+                        target, resp.get("code"), resp.get("message"))
+            continue
+        for d in (resp.get("result") or []):
+            imei = d.get("imei")
+            if imei:
+                devices_by_imei[imei] = d
+        log.info("  target=%s returned %d devices", target, len(resp.get("result") or []))
 
-    api_devices = resp.get("result") or []
-    log.info("API returned %d devices.", len(api_devices))
+    api_devices = list(devices_by_imei.values())
+    if not api_devices:
+        log.error("No devices returned from any target. Aborting.")
+        return
+    log.info("API returned %d unique devices across %d target(s).",
+             len(api_devices), len(TARGETS))
 
     # 2. Fetch current DB state
     with get_conn() as conn:

webhook_receiver_rev.py

@@ -543,7 +543,14 @@ async def push_trip_report(request: Request):
                         cur.execute("RELEASE SAVEPOINT sp")
                         continue
 
-                    # [FIX-M11] API sends km. Store directly as distance_km.
+                    # [BUG-03 — under investigation] The field is named `miles`
+                    # but FIX-M11 claims it is already km. The polling endpoint
+                    # was found to return metres despite docs (FIX-M16), so the
+                    # webhook unit is suspect. Until the diagnostic
+                    # db_audit/checks/bug03_webhook_distance_units.sql confirms
+                    # the unit, store the raw value unchanged and rely on the
+                    # diagnostic's ratio test to decide whether a /1.609 or
+                    # /1000 conversion is needed.
                     distance_km = clean_num(item.get("miles"))
 
                     begin_lat = clean_num(item.get("beginLat"))